KTLP160J3 TLD

KTLP160J Series 4PIN MINI-FLAT RANDOM-PHASE TRIAC DRIVER PHOTOCOUPLER cosmo z Description z Schematic The KTLP160J series consist of a GaAs infrared emitting diode optically coupled to a on-zero-crossing 1 4 2 3 silicon bilateral AC switch (TRIAC). These devices isolate low voltage logic from 115/240 VAC lines to provide random phase control of high current TRIACs or thyristors. These devices feature greatly enhanced static dv/dt capability to ensure stable 1. Anode switching performance of inductive loads. 2. Cathode 3. Main terminal 4. Main terminal z Features 1. Pb free and RoHS compliant 2. 600V peak blocking voltage 3. Subminiature type (The volume is smaller than that of our conventional DIP type by as far as 30%) 4. Simplifies logic control of 115/240 VAC power 5. Non zero voltage crossing 6. Isolation voltage between input and output (Viso：3750Vms) 7. MSL class 1 8. Agency Approvals： • UL Approved (No. E169586): UL1577 • C-UL Approved (No. E169586) • VDE Approved (No. 40009235): DIN EN60747-5-5 • CQC Approved: GB8898-2011, GB4943.1-2011 z Applications • Solenoid/Valve controls • Lighting controls • Static power switches • AC motor drives • Temperature controls • E.M contactors • AC motor contactors • Solid state relay • Programmable controllers Cosmo Electronics Corp. Document No. 69P43002.4 -1- http://www.cosmo-ic.com KTLP160J Series 4PIN MINI-FLAT RANDOM-PHASE TRIAC DRIVER PHOTOCOUPLER cosmo z Outside Dimension Unit：mm 2.0 ±0.5 0.10±0.10 3.90 ±0.5 4.40 ±0.5 0.40 0.50 2.54 7.00 ±0.4 TOLERANCE : ±0.2mm z Device Marking Notes： COSMO 160J cosmo 160J YWW YWW Cosmo Electronics Corp. Document No. 69P43002.4 -2- Y：Year code / W：Week code http://www.cosmo-ic.com KTLP160J Series 4PIN MINI-FLAT RANDOM-PHASE TRIAC DRIVER PHOTOCOUPLER cosmo z Absolute Maximum Ratings (Ta=25℃) Parameter Input Output Symbol Rating Unit Forward current IF 50 mA Peak forward current IFM 1 A Reverse voltage VR 6 V Power dissipation PD 70 mW Off-state output terminal voltage VDRM 600 VPEAK On-state R.M.S. current IT(RMS) 70 mA Peak repetitive surge current (PW=10ms.DC 10%) ITSM 1 A Power dissipation PD 150 mW Total power dissipation Ptot 200 mW Isolation voltage 1 minute Viso 3750 Vrms Operating temperature Topr -40 to +115 ℃ Storage temperature Tstg -50 to +125 ℃ Soldering temperature 10 seconds Tsol 260 ℃ z Electro-optical Characteristics Parameter Forward voltage Input Reverse current Peak blocking current Output On-state voltage Holding current Conditions IF=10mA VR=4V VDRM Rated ITM=70mA (Ta=25℃) Min. Typ. Max. Unit 1.2 1.4 V 10 μA μA 1 1.6 3 V 0.1 mA dv/dt VDRM=(1/ 2 )*Rated 1000 Riso DC500V IFT KTLP160J1 Main Terminal KTLP160J2 Voltage=3V KTLP160J3 5x1010 1011 - Ton VD=6V, RL=100Ω,IF=20mA Symbol VF IR IDRM VTM IH Critical rate of rise of off-state voltage Transfer Isolation resistance characteristics Minimum trigger current Turn-on time - - - - V/μs 10 7 5 Ω mA mA mA 100 μs z Static dv/dt Test Circuit Vdc RTEST R=10KΩ CTEST PULSE INPUT MERCURY WETTED RELAY APPLIED VOLTAGE WAVEFORM D.U.T X100 SCOPE PROBE 0 VOLTS Vmax 0.63 Vmax dv/dt = 0.63 Vmax τRC τRC Cosmo Electronics Corp. Document No. 69P43002.4 -3- http://www.cosmo-ic.com KTLP160J Series 4PIN MINI-FLAT RANDOM-PHASE TRIAC DRIVER PHOTOCOUPLER cosmo Fig.1 Forward Current e vs. Ambient Temperature Fig.2 Diode Power Dissipation vs. Ambient Temperature 120 Diode Power Dissipation PD (mW) Forward Current IF ( mA ) 60 50 40 30 20 10 0 -4 0 -2 0 0 20 40 60 80 100 115 100 80 70 60 40 20 0 -4 0 Ambient Temperature Ta (℃) Total Power Dissipation PD (mW) On-state Current ITM ( mA ) 100 80 70 60 40 20 20 40 60 80 100 115 250 200 150 100 50 0 -40 -20 0 20 40 60 80 100 115 1000 Pulse width